Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Check for Leaks and Restore Water Flow

Slowly turn the water supply back on and carefully inspect all connections for leaks. Test both hot and cold water lines. Tighten any loose fittings if necessary.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Check for Leaks and Restore Water Flow

Slowly turn the water supply back on and carefully inspect all connections for leaks. Test both hot and cold water lines. Tighten any loose fittings if necessary.

Videos for this step

Test InstallationFinal Checks and Leak TestInstallation Step 6: Turn on Water and Flush System

← Project

Tub Faucet Valve Replacement: A Step-by-Step DIY Guide

Step 5 of 5·15 min left

Shut Off the Water Supply
5 minsBeginner
Access the Tub Faucet Valve
30 mins1 itemsIntermediate
Remove the Old Valve
30 mins2 itemsAdvanced
Install the New Tub Faucet Valve
1 min3 itemsAdvanced
5
Check for Leaks and Restore Water Flow
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.