Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Make the Back Cut

Start the back cut on the side opposite the directional notch. This cut should be horizontal and slightly above the apex of the directional notch. Stop the back cut when a sufficient amount of wood remains to act as a hinge (typically about 10% of the tree's diameter). The hinge will control the fall of the tree. As the cut progresses, watch for any movement and be ready to retreat.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Make the Back Cut

Start the back cut on the side opposite the directional notch. This cut should be horizontal and slightly above the apex of the directional notch. Stop the back cut when a sufficient amount of wood remains to act as a hinge (typically about 10% of the tree's diameter). The hinge will control the fall of the tree. As the cut progresses, watch for any movement and be ready to retreat.

Videos for this step

Perform the Back CutPerform the Back Cut and Create the HingeMake the Back Cut

Tools and Materials

← Project

Tree Removal

Step 5 of 8·5.9 hr left

Assess Tree and Surrounding Area
60 minutes3 items
Plan the Fall Direction and Cutting Strategy
90 minutes4 items
Prepare Chainsaw and Safety Gear
30 minutes10 items
Make the Directional Notch
45 minutes2 items
5
Make the Back Cut
45 minutes3 items
6
Execute Tree Felling and Retreat
10 minutes1 items
7
Limb and Buck the Tree
180 minutes2 items
8
Debris Removal and Site Cleanup
120 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.