Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Step 1: Find Your Tread Depth (Front to Back)

Place your tape measure firmly against the riser (the vertical part at the back of the step). Extend the tape straight across the flat part of the step and over the rounded front edge, which we call the nosing. It's vital to keep the tape measure flat and level for an accurate reading. Important: Always measure the bare wood surface. Measuring over old carpet, padding, or leftover adhesive will throw off your numbers and compromise the fit. Jot down the depth for every single step.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Step 1: Find Your Tread Depth (Front to Back)

Place your tape measure firmly against the riser (the vertical part at the back of the step). Extend the tape straight across the flat part of the step and over the rounded front edge, which we call the nosing. It's vital to keep the tape measure flat and level for an accurate reading. Important: Always measure the bare wood surface. Measuring over old carpet, padding, or leftover adhesive will throw off your numbers and compromise the fit. Jot down the depth for every single step.

Videos for this step

Measure Riser Height and Tread Depth ConsistencyMeasure Individual Stair ComponentsMeasure Treads and Mark Laminate

← Project

Tread Depth Measurement

Step 1 of 3·15 min left

1
Step 1: Find Your Tread Depth (Front to Back)
5 minutes
2
Step 2: Determine Your Tread Width (Side to Side)
5 minutes
3
Step 3: Document and Double-Check Your Work
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.