Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Preparing for Toilet Removal: Disconnecting Water Supply

Before you begin, shut off the water supply valve located behind or near the toilet base. If no valve exists, turn off the main water supply. Then, flush the toilet completely and use a sponge to remove any remaining water from the tank and bowl. This prevents spills and simplifies the process.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Preparing for Toilet Removal: Disconnecting Water Supply

Before you begin, shut off the water supply valve located behind or near the toilet base. If no valve exists, turn off the main water supply. Then, flush the toilet completely and use a sponge to remove any remaining water from the tank and bowl. This prevents spills and simplifies the process.

Videos for this step

Turn Off Water and Drain TankEmpty TankShut Off Water and Empty Toilet

Tools and Materials

← Project

Toilet Installation Guide: Mastering Bathroom Plumbing with Diagrams

Step 1 of 7·2.1 hr left

1
Preparing for Toilet Removal: Disconnecting Water Supply
30 mins1 itemsBeginner
2
Removing the Existing Toilet Tank
15 mins1 itemsIntermediate
3
Removing the Toilet Bowl: Breaking the Wax Seal
20 mins2 itemsAdvanced
4
Installing the New Wax Ring: Ensuring a Watertight Seal
10 mins1 itemsBeginner
5
Securing the Toilet Bowl: Aligning and Tightening
20 mins1 itemsIntermediate
6
Installing the Toilet Tank: Connecting and Securing
15 mins1 itemsIntermediate
7
Final Leak Test and Verification
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.