Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test the Flush

Flush the toilet and observe. Check that the tank fills properly and the water level is correct. Listen for any continuous running water, which indicates a leak. You may need to adjust the flapper chain or ensure the flapper is seating correctly if the toilet continues to run.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test the Flush

Flush the toilet and observe. Check that the tank fills properly and the water level is correct. Listen for any continuous running water, which indicates a leak. You may need to adjust the flapper chain or ensure the flapper is seating correctly if the toilet continues to run.

Videos for this step

Test the flushTest for LeaksTest the New Flapper

← Project

Toilet Flapper Replacement

Step 6 of 6·5 min left

Shut Off Water Supply
2 minutes1 items
Drain the Toilet Tank
3 minutes2 items
Remove the Old Flapper
3 minutes1 items
Install the New Flapper
5 minutes1 items
Turn Water Supply Back On
2 minutes1 items
6
Test the Flush
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.