Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Step 2: Measure the Depth of Each Tread

For each individual step, place your tape measure firmly against the vertical riser (the back panel of the step). Extend the tape straight across the flat part of the tread and over the rounded front edge, which is called the 'nosing.' It's crucial to keep the tape measure flat and level for an accurate reading. Important: Always measure the bare wood. Do not measure over old carpet, pads, or adhesive residue, as this will give you an incorrect measurement and compromise the fit. Record the depth for each step before moving to the next.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Step 2: Measure the Depth of Each Tread

For each individual step, place your tape measure firmly against the vertical riser (the back panel of the step). Extend the tape straight across the flat part of the tread and over the rounded front edge, which is called the 'nosing.' It's crucial to keep the tape measure flat and level for an accurate reading. Important: Always measure the bare wood. Do not measure over old carpet, pads, or adhesive residue, as this will give you an incorrect measurement and compromise the fit. Record the depth for each step before moving to the next.

Videos for this step

Measure Stair Tread DepthMeasure Treads and Mark LaminateMeasure and Mark Treads

← Project

staircase measurement

Step 2 of 4·9 min left

Step 1: Count Your Treads & Gather Your Gear
5 minutes
2
Step 2: Measure the Depth of Each Tread
2 minutes
3
Step 3: Measure the Width of Each Tread
2 minutes
4
Step 4: Record, Double-Check, and Document
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.