Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Step 2: Prep and Clean the Stair Stringers

Take a moment to inspect the stair stringers. Remove any leftover hardware, splinters, or old adhesive residue. A stiff brush and a scraper are perfect for this job. The goal is a clean, smooth, and level surface. This simple prep work is key to ensuring your new treads sit flush and are properly supported for long-lasting safety.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Step 2: Prep and Clean the Stair Stringers

Take a moment to inspect the stair stringers. Remove any leftover hardware, splinters, or old adhesive residue. A stiff brush and a scraper are perfect for this job. The goal is a clean, smooth, and level surface. This simple prep work is key to ensuring your new treads sit flush and are properly supported for long-lasting safety.

Videos for this step

Remove Nails and Clean StringersPrepare the Stair StructureRemove Old Wooden Treads

← Project

Stair Tread Replacement

Step 2 of 5·1.2 hr left

Step 1: Carefully Remove the Old Treads
15 minutes
2
Step 2: Prep and Clean the Stair Stringers
10 minutes
3
Step 3: Measure Twice, Cut Once for a Perfect Fit
20 minutes
4
Step 4: Secure Your New Treads
25 minutes1 items
5
Step 5: Protect Your Investment (Optional but Recommended)
15 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.