Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Carefully Remove the Old Treads

The first step to elevate your staircase is removing what's already there. Locate the seam where your existing tread meets the vertical riser and the side support (the stringer). Gently insert a pry bar into this gap and apply steady leverage to loosen the tread. Work your way along the edge. If the treads are fastened with visible screws or nails, remove them first to make this job easier. For a stubborn tread, a firm tap on the pry bar with a rubber mallet can provide the necessary force, but always work with care to avoid damaging the core structure of your staircase. Remove each tread one by one.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Carefully Remove the Old Treads

The first step to elevate your staircase is removing what's already there. Locate the seam where your existing tread meets the vertical riser and the side support (the stringer). Gently insert a pry bar into this gap and apply steady leverage to loosen the tread. Work your way along the edge. If the treads are fastened with visible screws or nails, remove them first to make this job easier. For a stubborn tread, a firm tap on the pry bar with a rubber mallet can provide the necessary force, but always work with care to avoid damaging the core structure of your staircase. Remove each tread one by one.

Videos for this step

Carefully Remove Old TreadsRemove Old Wooden TreadsPhysically Remove Old Stair Treads

← Project

Stair Tread Installation

Step 1 of 6·5.3 hr left

1
Carefully Remove the Old Treads
30 minutes
2
Inspect and Prepare the Foundation
45 minutes
3
Measure and Cut Your New Treads
60 minutes1 items
4
Adjust Riser Height if Needed
60 minutes
5
Install Your New Stair Treads
90 minutes
6
Final Finishing and Inspection
30 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.