Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Measure the Right Side of the Same Step

Staying on the same step, move your tape measure to the other side and repeat the process. Measure from the riser straight out to the front edge of the nosing. Write this measurement down next to your first one. Comparing these two will immediately tell you if your treads have any taper.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Measure the Right Side of the Same Step

Staying on the same step, move your tape measure to the other side and repeat the process. Measure from the riser straight out to the front edge of the nosing. Write this measurement down next to your first one. Comparing these two will immediately tell you if your treads have any taper.

Videos for this step

Measure Stair TreadsMeasure Treads and Mark LaminateMeasure and Mark Tread and Nosing

← Project

Stair Tread Depth Measurement

Step 2 of 5·20 min left

Measure the Left Side of a Step
5 minutes
2
Measure the Right Side of the Same Step
5 minutes
3
Check for Consistency Across the Width
10 minutes
4
Identify Your Narrowest Measurement
3 minutes
5
Choose the Perfect Tread Depth for Your Home
2 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.