Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test for Leaks and Restore Water Supply

Slowly turn the water supply back on. Carefully check all connections for leaks. If you find any, gently tighten the shower arm or re-wrap the threads with Teflon tape. Once you're confident there are no leaks, reinstall the showerhead (if removed).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test for Leaks and Restore Water Supply

Slowly turn the water supply back on. Carefully check all connections for leaks. If you find any, gently tighten the shower arm or re-wrap the threads with Teflon tape. Once you're confident there are no leaks, reinstall the showerhead (if removed).

Videos for this step

Test for LeaksTest for LeaksTest for Leaks

← Project

Shower Arm Replacement: A Step-by-Step DIY Guide

Step 5 of 5·5 min left

Turn Off the Shower's Water Supply
5 minsBeginner
Remove the Old Shower Arm and Showerhead
15 mins2 itemsBeginner
Prepare the New Shower Arm for Installation
10 mins2 itemsIntermediate
Install the New Shower Arm
5 mins2 itemsIntermediate
5
Test for Leaks and Restore Water Supply
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.