Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Inspect Effluent Filter (if applicable)

If your septic tank has an effluent filter, locate it and remove it for inspection. Look for any clogging, damage, or excessive buildup of solids. Clean the filter according to manufacturer instructions if it appears clogged. Reinsert the filter properly after cleaning or inspection.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Inspect Effluent Filter (if applicable)

If your septic tank has an effluent filter, locate it and remove it for inspection. Look for any clogging, damage, or excessive buildup of solids. Clean the filter according to manufacturer instructions if it appears clogged. Reinsert the filter properly after cleaning or inspection.

Videos for this step

Remove and Clean the FilterIntroduction and Locate FilterRemove Septic Lid

Tools and Materials

← Project

Septic System Inspection

Step 3 of 9·1.6 hr left

Locate Septic Tank Lid
30 minutes4 items
Open Septic Tank Lid
15 minutes3 items
3
Inspect Effluent Filter (if applicable)
20 minutes4 items
4
Assess Scum and Sludge Layers
15 minutes4 items
5
Check for Leaks or Cracks
10 minutes2 items
6
Inspect Inlet and Outlet Baffles
10 minutes3 items
7
Observe Effluent Discharge (if possible)
5 minutes2 items
8
Replace Septic Tank Lid
10 minutes2 items
9
Backfill and Restore Area
25 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.