Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Mark Hanging Points

Hold the mirror against the wall in its intended position, or use its dimensions to calculate the hanging points. If using D-rings and wire on the mirror, measure the distance from the top of the mirror to the hanging point of the wire when taut. Transfer these measurements to the wall, aligning with the marked stud locations. Mark the exact spot(s) where screws or anchors will go. Use a level to ensure your marks are perfectly horizontal.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Mark Hanging Points

Hold the mirror against the wall in its intended position, or use its dimensions to calculate the hanging points. If using D-rings and wire on the mirror, measure the distance from the top of the mirror to the hanging point of the wire when taut. Transfer these measurements to the wall, aligning with the marked stud locations. Mark the exact spot(s) where screws or anchors will go. Use a level to ensure your marks are perfectly horizontal.

← Project

Secure Mirror

Step 3 of 7·45 min left

Locate Wall Studs
15 minutes
Determine Mirror Hanging Hardware
10 minutes
3
Mark Hanging Points
15 minutes
4
Drill Pilot Holes
10 minutes
5
Install Hanging Hardware
10 minutes
6
Attach Mirror to Hardware
5 minutes
7
Level and Secure Mirror
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.