Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 9 · Reassemble and Test

Place the toilet tank lid back on. Turn the water supply valve counter-clockwise to restore the water supply. Listen to see if the toilet continues to run. Flush the toilet and observe if the water stops filling at the appropriate level and if there are any leaks.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 9 · Reassemble and Test

Place the toilet tank lid back on. Turn the water supply valve counter-clockwise to restore the water supply. Listen to see if the toilet continues to run. Flush the toilet and observe if the water stops filling at the appropriate level and if there are any leaks.

Videos for this step

Test and AdjustTurn on Water and TestRestore Water and Test

Tools and Materials

← Project

Running Toilet Repair

Step 9 of 9·5 min left

Turn Off Water Supply
1 minute1 items
Flush Toilet to Empty Tank
1 minute
Remove Toilet Tank Lid
1 minute1 items
Check Flapper Seal
3 minutes1 items
Replace Flapper if Necessary
5 minutes2 items
Check Fill Valve Operation
3 minutes2 items
Adjust or Replace Fill Valve
15 minutes3 items
Check Flush Valve Seat
2 minutes1 items
9
Reassemble and Test
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.