Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test for Leaks

Slowly turn the water supply back on. Carefully check all connections for leaks. If you find any leaks, immediately turn the water off, tighten the connections, and re-check.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test for Leaks

Slowly turn the water supply back on. Carefully check all connections for leaks. If you find any leaks, immediately turn the water off, tighten the connections, and re-check.

Videos for this step

Restore Water and Check for LeaksCheck for leaksRestore Water and Check for Leaks

← Project

Replace Your Bathroom Faucet: A Step-by-Step Guide

Step 6 of 6·5 min left

Turn Off the Water Supply
5 minsBeginner
Disconnect the Faucet's Water Supply Lines
15 mins2 itemsIntermediate
Remove the Old Faucet
20 mins1 itemsAdvanced
Clean the Sink Surface
5 mins2 itemsBeginner
Install the New Bathroom Faucet
30 mins2 itemsAdvanced
6
Test for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.