Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Remove the Old Shower Head

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully unscrew the old shower head by turning it counterclockwise. Use an adjustable wrench if needed, protecting the finish by wrapping the wrench with a soft cloth. Be gentle to avoid damaging the shower arm.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Remove the Old Shower Head

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully unscrew the old shower head by turning it counterclockwise. Use an adjustable wrench if needed, protecting the finish by wrapping the wrench with a soft cloth. Be gentle to avoid damaging the shower arm.

Videos for this step

Remove the Old ShowerheadRemove the ShowerheadRemove Shower Head

Tools and Materials

← Project

Rain Shower Head Installation: Low Water Pressure Solution

Step 2 of 5·30 min left

Turn Off the Water Supply
5 minsBeginner
2
Remove the Old Shower Head
10 mins2 itemsIntermediate
3
Clean the Shower Arm Threads
5 mins1 itemsBeginner
4
Install the New Rain Shower Head
10 mins1 itemsIntermediate
5
Check for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.