Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 1 · Remove Existing Drain Assembly

Begin by unscrewing the drain flange from the sink basin. This may require a drain wrench or pliers. Once the flange is removed, reach into the drain opening and disconnect the pop-up stopper from the horizontal pivot rod. Then, unscrew the pivot rod nut from the underside of the sink and remove the pivot rod. Finally, pull the entire drain assembly out from the top of the sink.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Remove Existing Drain Assembly

Begin by unscrewing the drain flange from the sink basin. This may require a drain wrench or pliers. Once the flange is removed, reach into the drain opening and disconnect the pop-up stopper from the horizontal pivot rod. Then, unscrew the pivot rod nut from the underside of the sink and remove the pivot rod. Finally, pull the entire drain assembly out from the top of the sink.

← Project

Pop-up Drain Stopper Repair

Step 1 of 5·45 min left

1
Remove Existing Drain Assembly
15 minutes
2
Clean Drain Components
10 minutes
3
Manually Operate Stopper
5 minutes
4
Reassemble Drain Without Lift Rod Mechanism
10 minutes
5
Test Drain Operation
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.