Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Insulate Pipe Fittings

Carefully fit the pre-cut insulation pieces around elbows and tees. For elbows, ensure the angled cuts meet snugly to create a continuous insulating barrier. Use adhesive tape or specialized fitting covers to seal any gaps around the fittings. This step is critical for preventing thermal bridging, where heat can escape or enter through uninsulated areas.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Insulate Pipe Fittings

Carefully fit the pre-cut insulation pieces around elbows and tees. For elbows, ensure the angled cuts meet snugly to create a continuous insulating barrier. Use adhesive tape or specialized fitting covers to seal any gaps around the fittings. This step is critical for preventing thermal bridging, where heat can escape or enter through uninsulated areas.

Videos for this step

Insulate Second Elbow and Secure All Insulation with TapeInstall Insulation on FittingsInstall Insulation on Fittings

Tools and Materials

← Project

Pipe Insulation

Step 5 of 8·2.5 hr left

Assess Pipe Location and Type
30 minutes2 items
Select Insulation Material
20 minutes3 items
Measure and Cut Insulation
45 minutes3 items
Install Insulation on Straight Pipe Sections
60 minutes2 items
5
Insulate Pipe Fittings
40 minutes3 items
6
Seal All Seams and Joints
30 minutes3 items
7
Apply Outer Jacket (if applicable)
60 minutes4 items
8
Inspect and Test
20 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.