Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Reconnect Water Supply & Test for Leaks

Connect the water supply line to the toilet tank. Turn the water supply back on slowly. Carefully check all connections for leaks. If any leaks are found, tighten the connections slightly. Flush the toilet several times to ensure proper operation. Install the toilet seat and lid.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Reconnect Water Supply & Test for Leaks

Connect the water supply line to the toilet tank. Turn the water supply back on slowly. Carefully check all connections for leaks. If any leaks are found, tighten the connections slightly. Flush the toilet several times to ensure proper operation. Install the toilet seat and lid.

Videos for this step

Reconnect Water and Test for LeaksConnect water supply and check for leaksConnect Water Supply and Test

← Project

New Toilet Installation: A Step-by-Step DIY Guide

Step 4 of 4·30 min left

Shut Off Water Supply & Empty Toilet Bowl
15 mins1 itemsBeginner
Remove the Old Toilet
30 mins1 itemsIntermediate
Install the New Toilet
30 mins1 itemsIntermediate
4
Reconnect Water Supply & Test for Leaks
30 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.