Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Test for Leaks and Finalize

Turn the water supply back on slowly and carefully check all connections for leaks. If any leaks are detected, tighten connections or reinstall components as necessary. Run the shower for several minutes to ensure proper hot water flow and pressure.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test for Leaks and Finalize

Turn the water supply back on slowly and carefully check all connections for leaks. If any leaks are detected, tighten connections or reinstall components as necessary. Run the shower for several minutes to ensure proper hot water flow and pressure.

Videos for this step

Turn On Water and Test for LeaksRestore Water and Test for LeaksTest the System

← Project

Moen Shower Trim Kit Installation: A Step-by-Step DIY Guide

Step 4 of 4·5 min left

Shut Off the Water Supply
5 minsBeginner
Remove the Old Shower Trim Kit
15 mins1 itemsIntermediate
Install the New Moen Shower Trim Kit
30 mins2 itemsIntermediate
4
Test for Leaks and Finalize
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.