Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Confirm Nosing Dimensions and Step Width

First, check the 'nosing overhang'—that's the part of the step that hangs over the riser below. For a safe installation, this should be between 3/4 and 1 1/4 inches. Also, make sure the rounded edge has a radius no more than 1/2 inch to prevent any potential trip hazards, giving your family peace of mind. Finally, measure the total width of your step from side to side. Our custom-made-to-fit treads are designed to match this full width, giving you complete coverage and a truly polished finish.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Confirm Nosing Dimensions and Step Width

First, check the 'nosing overhang'—that's the part of the step that hangs over the riser below. For a safe installation, this should be between 3/4 and 1 1/4 inches. Also, make sure the rounded edge has a radius no more than 1/2 inch to prevent any potential trip hazards, giving your family peace of mind. Finally, measure the total width of your step from side to side. Our custom-made-to-fit treads are designed to match this full width, giving you complete coverage and a truly polished finish.

Videos for this step

Measure Stair Tread WidthMeasure Stair Tread DepthTest Fit Bullnose and Measure for Tread Planks

Tools and Materials

← Project

measure stairs for bullnose treads

Step 2 of 3·10 min left

Measure the Total Tread Depth Over the Bullnose
5 minutes
2
Confirm Nosing Dimensions and Step Width
5 minutes1 items
3
Account for Carpet Pile and Special Starter Steps
5 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.