Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Apply Non-Slip Treads

Clean each stair tread thoroughly, removing any dirt, dust, or old adhesive. Ensure the surface is completely dry before proceeding. Measure the width and depth of each tread to determine the size and number of non-slip treads needed. Cut the treads or tape to fit the dimensions of each stair, allowing for a slight overlap on the edges if desired. Peel the protective backing from the non-slip material. Carefully align and press the treads onto the stair treads, starting from the back and smoothing towards the front to eliminate air bubbles. Apply firm pressure to ensure good adhesion.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Apply Non-Slip Treads

Clean each stair tread thoroughly, removing any dirt, dust, or old adhesive. Ensure the surface is completely dry before proceeding. Measure the width and depth of each tread to determine the size and number of non-slip treads needed. Cut the treads or tape to fit the dimensions of each stair, allowing for a slight overlap on the edges if desired. Peel the protective backing from the non-slip material. Carefully align and press the treads onto the stair treads, starting from the back and smoothing towards the front to eliminate air bubbles. Apply firm pressure to ensure good adhesion.

Videos for this step

Prepare Anti-Slip TreadApply Anti-Slip StripPrepare Steps and Apply Non-Skid Strips

Tools and Materials

← Project

How to Make Stairs Safer for Seniors

Step 3 of 4·3.5 hr left

Install Stair Lighting
180 minutes11 items
Extend Handrails
120 minutes10 items
3
Apply Non-Slip Treads
90 minutes6 items
4
Add Visual Contrast to Stair Edges
120 minutes8 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.