Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Removing Your Old Shower Head

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully unscrew the old showerhead by turning it counterclockwise. If it's stuck, use an adjustable wrench wrapped in a cloth to prevent damage. Apply penetrating lubricant like WD-40 if needed, allowing it to sit for a few minutes before attempting removal.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Removing Your Old Shower Head

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully unscrew the old showerhead by turning it counterclockwise. If it's stuck, use an adjustable wrench wrapped in a cloth to prevent damage. Apply penetrating lubricant like WD-40 if needed, allowing it to sit for a few minutes before attempting removal.

Videos for this step

Remove Existing Shower HeadRemove old showerheadRemove the Showerhead

Tools and Materials

← Project

Low Water Pressure Rainshower Shower Head Installation Guide

Step 1 of 3·35 min left

1
Removing Your Old Shower Head
15 mins2 itemsIntermediate
2
Cleaning the Shower Arm Threads
5 mins1 itemsBeginner
3
Installing Your New Rainshower Shower Head
15 minsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.