Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Prepare Wall for Mounting

If mounting into studs, drill pilot holes slightly smaller than the screws you will be using at the marked locations. If using wall anchors, follow the manufacturer's instructions to install them at the marked locations. Ensure anchors are fully seated and flush with the wall.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Prepare Wall for Mounting

If mounting into studs, drill pilot holes slightly smaller than the screws you will be using at the marked locations. If using wall anchors, follow the manufacturer's instructions to install them at the marked locations. Ensure anchors are fully seated and flush with the wall.

Videos for this step

Drill Pilot Holes and Install AnchorsPrepare Wall for MountingDrill Pilot Holes for Screws

Tools and Materials

← Project

How to Install Wall Hooks and a Coat Rack in an Entry

Step 3 of 4·25 min left

Determine Mounting Location
15 minutes4 items
Mark Mounting Holes
10 minutes3 items
3
Prepare Wall for Mounting
15 minutes4 items
4
Mount the Coat Rack
10 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.