
How to Install Carpet Treads on Steep Cottage or Attic Stairs
About This Project
This project outlines the steps for installing carpet treads on steep cottage or attic stairs to improve safety and traction.
Tools & Materials

Nance Carpet and Rug Peel and Stick Charcoal 8 in. x 18 in. Stair Tread Cover (Set of 13) 17668

Scrub Brush

GENESIS 20 in. Black 3-Speed Settings Box Fan with Max Cooling Technology G20BOX-BLK

Towel

QEP 1-4/5 in. Flat Top V-Notch Pro Flooring Trowel with Wood Handle 49730

ROBERTS 1 in. x 164 ft. Roll of Double-Sided Acrylic Carpet Adhesive Strip-Tape 50-560

Nance Carpet and Rug Peel and Stick Charcoal 8 in. x 18 in. Stair Tread Cover (Set of 13) 17668
Durable indoor/outdoor stair treads that feature commercial fibers made to last. Each stair tread is backed with contract grade peel and stick adhesive that will add support and service ability to your

Scrub Brush
Tackles tough stains with stiff bristles.

GENESIS 20 in. Black 3-Speed Settings Box Fan with Max Cooling Technology G20BOX-BLK
The Genesis 20 in. Box Fan is an energy efficient fan with innovative design. It has been constructed with a durable copper motor to last longer. This powerful floor fan is perfect for cooling a bedroom

Towel
Absorbs moisture and dries surfaces.

QEP 1-4/5 in. Flat Top V-Notch Pro Flooring Trowel with Wood Handle 49730
The QEP 49730 is designed for the professional installer. The QEP 4-1/2 in. Flat-Top V-Notch Traditional Wood Plank Adhesive Trowel features a hardened and tempered steel blade that is ground and polished

ROBERTS 1 in. x 164 ft. Roll of Double-Sided Acrylic Carpet Adhesive Strip-Tape 50-560
Roberts Max grip Indoor or Outdoor 164 ft. Double Sided Acrylic Adhesive Strip is a non-toxic, heavy-duty adhesive on a convenient, easy-to-use roll. HOMEeasy is ideal for the installation of vinyl transition
Steps
Inspect Stairs
10 minutesBefore applying the carpet treads, thoroughly inspect the stairs. Ensure each stair tread is clean, dry, and free from any dust, dirt, or old adhesive residue. Also, check the carpet treads themselves for any defects or damage that might affect their appearance or performance.
Watch: Prepare Stairs and TreadsClean Stairs
60 minutesUse a stiff brush and a mild detergent or a specialized carpet stair cleaner to scrub each stair tread. Rinse thoroughly with clean water and then use a clean cloth or towel to absorb as much moisture as possible. Allow the stairs to air dry completely, which may take several hours or overnight depending on humidity levels. A fan can be used to speed up the drying process.
Watch: Clean Stairs with DetergentPosition First Tread
5 minutesTake the first carpet tread and align it with the front edge of the top stair. Ensure it is centered from side to side and sits flush with the nosing of the stair. This precise alignment is crucial for the appearance and fit of subsequent treads.
Watch: Install First Stair TreadApply Adhesive (if necessary)
15 minutesIf your carpet treads do not have pre-applied adhesive, apply the recommended adhesive evenly to the back of the tread or to the stair tread itself. Follow the adhesive manufacturer's instructions regarding application method, drying or tacking time, and coverage. Ensure you use enough adhesive for a secure bond but avoid excessive amounts that could squeeze out.
Watch: Apply Carpet Adhesive to StairsInstall First Tread
5 minutesOnce positioned and adhesive is applied (if required), press the carpet tread down firmly onto the stair. Start from the edge closest to the nosing and work towards the back of the stair, smoothing out any wrinkles or air bubbles. Apply even pressure across the entire surface of the tread to ensure full contact with the adhesive.
Watch: Install First Stair TreadRepeat for Remaining Treads
45 minutesRepeat steps 3 through 5 for each subsequent stair tread. Ensure each new tread is aligned precisely with the previous one and the edge of its respective stair. Maintain consistent spacing and ensure firm adhesion on every tread. Pay close attention to the overlap or gap between treads as per the product's design.
Watch: Install Remaining TreadsFinal Inspection and Cleanup
15 minutesOnce all carpet treads are installed, walk across them to ensure they are all securely fastened and do not shift. Inspect for any loose edges or visible adhesive. Clean up any excess adhesive according to the manufacturer's instructions, using a damp cloth or a solvent if necessary. Remove any tools or materials from the work area.
Watch: Final Trimming and Inspection






