Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Apply Adhesive

Depending on the type of carpet tread and adhesive used, apply a consistent layer of adhesive to either the back of the carpet tread, the stair tread surface, or both. Ensure even coverage, especially around the edges and corners, to promote full adhesion. For contact cement, apply to both surfaces and allow it to become tacky before joining.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Apply Adhesive

Depending on the type of carpet tread and adhesive used, apply a consistent layer of adhesive to either the back of the carpet tread, the stair tread surface, or both. Ensure even coverage, especially around the edges and corners, to promote full adhesion. For contact cement, apply to both surfaces and allow it to become tacky before joining.

Videos for this step

Apply Adhesive to TreadsApply Carpet Adhesive to StairsApply Adhesive and Lay First Pieces

Tools and Materials

← Project

How to Install Carpet Treads on Stairs with an Open Side

Step 4 of 6·2.5 hr left

Clean Stair Treads
60 minutes3 items
Measure and Mark Carpet Treads
45 minutes3 items
Cut Carpet Treads
60 minutes3 items
4
Apply Adhesive
45 minutes1 items
5
Install Carpet Treads
75 minutes3 items
6
Trim Excess Carpet
30 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.