Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Allow Adhesive to Cure

After all the rug stair treads have been attached, it is essential to allow the adhesive to cure completely. Refer to the adhesive manufacturer's product label for specific curing times, which can range from 24 to 72 hours. During this curing period, avoid walking on the treads as much as possible. If foot traffic is unavoidable, do so carefully and minimize the weight and pressure applied to the treads. Proper curing ensures the adhesive reaches its maximum strength, providing a durable and safe installation.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Allow Adhesive to Cure

After all the rug stair treads have been attached, it is essential to allow the adhesive to cure completely. Refer to the adhesive manufacturer's product label for specific curing times, which can range from 24 to 72 hours. During this curing period, avoid walking on the treads as much as possible. If foot traffic is unavoidable, do so carefully and minimize the weight and pressure applied to the treads. Proper curing ensures the adhesive reaches its maximum strength, providing a durable and safe installation.

Videos for this step

Project CompletionCuring and Final RevealFinal Curing and Caulking

← Project

How to Install Braided Rug Stair Treads

Step 5 of 5·1.2 hr left

Clean Stair Treads
30 minutes3 items
Test Fit Rug Treads
15 minutes2 items
Apply Adhesive
20 minutes2 items
Attach Rug Tread to Stair
10 minutes1 items
5
Allow Adhesive to Cure
72 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.