Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Connect the Inlet Water Filter Supply Line

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Identify the filter's IN port (usually blue). Attach the inlet line, hand-tightening the compression nut before using a wrench to secure it an additional half to three-quarters of a turn. Avoid over-tightening.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Connect the Inlet Water Filter Supply Line

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Identify the filter's IN port (usually blue). Attach the inlet line, hand-tightening the compression nut before using a wrench to secure it an additional half to three-quarters of a turn. Avoid over-tightening.

Videos for this step

Attach the T-FittingConnect to Copper TubingConnect to Plastic Tubing

Tools and Materials

← Project

Install a Water Filter: A Step-by-Step Guide

Step 2 of 4·25 min left

Shut Off the Water Supply
5 minsBeginner
2
Connect the Inlet Water Filter Supply Line
10 mins3 itemsIntermediate
3
Connect the Outlet Water Filter Supply Line
10 mins3 itemsIntermediate
4
Connect and Secure All Water Supply Lines
5 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.