Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Install Mounting Hardware

Following the gate manufacturer's instructions, drill pilot holes at each marked location. The size of the pilot hole should be slightly smaller than the diameter of the screws provided. If mounting to a stud, ensure the screw penetrates well into the stud. If using drywall anchors, install them according to their specific instructions. Once pilot holes are drilled (and anchors installed if needed), align the mounting brackets or hinges with the holes and drive the screws firmly to secure them to the surface. Ensure all hardware is tightly fastened.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Install Mounting Hardware

Following the gate manufacturer's instructions, drill pilot holes at each marked location. The size of the pilot hole should be slightly smaller than the diameter of the screws provided. If mounting to a stud, ensure the screw penetrates well into the stud. If using drywall anchors, install them according to their specific instructions. Once pilot holes are drilled (and anchors installed if needed), align the mounting brackets or hinges with the holes and drive the screws firmly to secure them to the surface. Ensure all hardware is tightly fastened.

Videos for this step

Drill Pilot Holes and Install AnchorsInstall Gate (Hardware Mounting)Install Left Gate Mounts

Tools and Materials

← Project

How to Install a Pet Gate at the Bottom of Stairs

Step 3 of 5·55 min left

Select Gate Type and Location
30 minutes2 items
Mark Mounting Positions
15 minutes4 items
3
Install Mounting Hardware
25 minutes6 items
4
Attach Gate to Hardware
20 minutes2 items
5
Adjust and Test Latch Mechanism
10 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.