Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Reassemble and Test Drain

Once the water is flowing freely down the drain, it's time to reassemble and test your work. Clean any gunk off the drain cover before putting it back. Place the cover over the drain opening and secure it with the screw you removed earlier, using your screwdriver. Do not overtighten. Finally, turn on the shower and let the water run for a couple of minutes at full pressure. Watch the drain to confirm that water is draining quickly and not backing up.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Reassemble and Test Drain

Once the water is flowing freely down the drain, it's time to reassemble and test your work. Clean any gunk off the drain cover before putting it back. Place the cover over the drain opening and secure it with the screw you removed earlier, using your screwdriver. Do not overtighten. Finally, turn on the shower and let the water run for a couple of minutes at full pressure. Watch the drain to confirm that water is draining quickly and not backing up.

Videos for this step

Test Drain and Check for LeaksDisassemble and ReassembleReassemble Mechanism and Test Drain

Tools and Materials

← Project

How to Unclog a Shower Drain with Standing Water

Step 7 of 7·5 min left

Prepare Work Area and Gear Up
5 mins3 itemsBeginner
Remove the Drain Cover
5 mins2 itemsBeginner
Manual Clog Removal
5 mins2 itemsBeginner
Apply Natural Cleaning Solution
45 mins3 itemsBeginner
Flush the Drain with Hot Water
10 mins3 itemsBeginner
Use a Plumber's Snake (Auger)
20 mins4 itemsAdvanced
7
Reassemble and Test Drain
5 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.