Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Reassemble and Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

After the P-trap is clean, re-install it by reversing the removal process. Ensure the plastic washers (slip-joint washers) are correctly seated inside the slip nuts. Hand-tighten the nuts first to ensure they are not cross-threaded, then give them a final quarter-turn with the channel-lock pliers. Do not over-tighten, as this can crack the plastic fittings. Once reassembled, run hot water into the sink for several minutes and carefully check both slip nuts for any drips or leaks. If you see a leak, try tightening the nut slightly more. If the sink now drains freely and there are no leaks, the clog has been successfully cleared.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Reassemble and Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

After the P-trap is clean, re-install it by reversing the removal process. Ensure the plastic washers (slip-joint washers) are correctly seated inside the slip nuts. Hand-tighten the nuts first to ensure they are not cross-threaded, then give them a final quarter-turn with the channel-lock pliers. Do not over-tighten, as this can crack the plastic fittings. Once reassembled, run hot water into the sink for several minutes and carefully check both slip nuts for any drips or leaks. If you see a leak, try tightening the nut slightly more. If the sink now drains freely and there are no leaks, the clog has been successfully cleared.

Videos for this step

Test for Leaks and Drain FlowReassemble the P-trapTest the Drain

Tools and Materials

← Project

How to Unclog a Double Kitchen Sink with a Garbage Disposal

Step 7 of 7·10 min left

Safety First: Disconnect Power
5 mins1 itemsBeginner
Visually Inspect and Clear Disposal Chamber
5 mins3 itemsBeginner
Manually Turn Disposal Blades
5 mins1 itemsIntermediate
Reset Disposal and Test
5 minsBeginner
Plunge the Sink
10 mins4 itemsIntermediate
Clean the P-Trap
15 mins5 itemsAdvanced
7
Reassemble and Test for Leaks
10 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.