Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off Water Supply

Before starting any work, you must shut off the water to the faucet. Look for two small valves, one for the hot water line and one for the cold, located in the cabinet directly beneath the sink. Turn the handles of both valves clockwise until they are fully closed. If you cannot find these local shutoff valves, you will need to turn off the main water supply valve for the entire house. Once the valves are closed, turn on both faucet handles to release any trapped water and pressure in the lines until the water stops flowing completely.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off Water Supply

Before starting any work, you must shut off the water to the faucet. Look for two small valves, one for the hot water line and one for the cold, located in the cabinet directly beneath the sink. Turn the handles of both valves clockwise until they are fully closed. If you cannot find these local shutoff valves, you will need to turn off the main water supply valve for the entire house. Once the valves are closed, turn on both faucet handles to release any trapped water and pressure in the lines until the water stops flowing completely.

Videos for this step

Shut Off Water SupplyShut Off Water SupplyShut Off the Water Supply

← Project

How to Stop a Dripping Two-Handle Faucet

Step 1 of 7·45 min left

1
Shut Off Water Supply
5 minsBeginner
2
Remove Faucet Handle
5 mins3 itemsIntermediate
3
Remove the Packing Nut and Valve Stem
10 mins1 itemsAdvanced
4
Replace the Seat Washer and O-Ring
10 mins4 itemsIntermediate
5
Clean and Inspect the Valve Seat
5 mins2 itemsAdvanced
6
Reassemble the Faucet
5 mins7 itemsIntermediate
7
Turn On Water and Test for Leaks
5 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.