Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Light the Pilot Light

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

While holding the gas control knob down, use a long lighter or match to ignite the pilot light. Keep the flame near the pilot light opening until it ignites.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Light the Pilot Light

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

While holding the gas control knob down, use a long lighter or match to ignite the pilot light. Keep the flame near the pilot light opening until it ignites.

Videos for this step

Light the PilotIgnite the Pilot FlameIgnite Pilot

Tools and Materials

← Project

How to Safely Relight Your Gas Water Heater Pilot Light

Step 6 of 10·5 min left

Turn Off the Gas Supply
2 minsBeginner
Wait for Gas to Dissipate
5 minsBeginner
Access the Pilot Light Assembly
2 mins1 itemsBeginner
Locate the Pilot Light and Control Knob
1 minBeginner
Turn the Gas Control to "Pilot"
1 minBeginner
6
Light the Pilot Light
1 min1 itemsIntermediate
7
Hold the Control Knob
1 minBeginner
8
Release the Gas Control Knob and Check the Pilot
1 minBeginner
9
Replace the Access Panel and Turn the Gas On
1 min1 itemsBeginner
10
Final Checks
1 minBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.