Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Final Checks and Testing

Carefully push the washing machine back into its original position, making sure not to kink the new drain hose or the water supply lines. Turn the hot and cold water supply valves counter-clockwise to open them. Plug the washing machine back into the electrical outlet. Run the machine on a small rinse and spin cycle, or a drain/spin cycle. While it is draining, use a flashlight to carefully inspect the new connection at the back of the machine for any drips or leaks. Also, check that the hose remains secure in the standpipe. If everything is dry and secure, the job is complete.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Final Checks and Testing

Carefully push the washing machine back into its original position, making sure not to kink the new drain hose or the water supply lines. Turn the hot and cold water supply valves counter-clockwise to open them. Plug the washing machine back into the electrical outlet. Run the machine on a small rinse and spin cycle, or a drain/spin cycle. While it is draining, use a flashlight to carefully inspect the new connection at the back of the machine for any drips or leaks. Also, check that the hose remains secure in the standpipe. If everything is dry and secure, the job is complete.

Videos for this step

Check for LeaksRestore Water and PowerTurn On Water and Test for Leaks

Tools and Materials

← Project

How to Replace a Washing Machine Drain Hose

Step 7 of 7·10 min left

Preparation and Safety
5 mins5 itemsBeginner
Access the Hose Connections
5 minsBeginner
Disconnect Hose from Standpipe
5 mins2 itemsBeginner
Disconnect Old Hose from Washing Machine
5 mins2 itemsIntermediate
Connect New Hose to Washing Machine
5 mins2 itemsIntermediate
Route and Secure Hose in Standpipe
5 mins3 itemsBeginner
7
Final Checks and Testing
10 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.