Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test for Leaks

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

This is a critical step that must not be rushed. Ensure the new valve is in the 'off' position. Go to the main water shut-off valve and turn it on SLOWLY. Listen for the sound of rushing water filling the pipes. Once the sound stops, return to the access panel. With a bright flashlight, carefully inspect every single soldered joint for any signs of moisture. Look for even the smallest bead of water or a slow drip. Check the connections for a full five to ten minutes to ensure they are completely watertight. If you find a leak, you must shut off the water, drain the system, and re-solder the faulty joint.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test for Leaks

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

This is a critical step that must not be rushed. Ensure the new valve is in the 'off' position. Go to the main water shut-off valve and turn it on SLOWLY. Listen for the sound of rushing water filling the pipes. Once the sound stops, return to the access panel. With a bright flashlight, carefully inspect every single soldered joint for any signs of moisture. Look for even the smallest bead of water or a slow drip. Check the connections for a full five to ten minutes to ensure they are completely watertight. If you find a leak, you must shut off the water, drain the system, and re-solder the faulty joint.

Videos for this step

Restore Water and Check for LeaksFlushing and Leak TestingPressurize and Test for Leaks

Tools and Materials

← Project

How to Replace a Two-Handle Shower Faucet

Step 6 of 8·1.8 hr left

Preparation and Water Shut-Off
20 mins2 itemsBeginner
Remove Old Faucet Trim
25 mins4 itemsIntermediate
Access the Valve Body
30 mins7 items
Disconnect and Remove Old Valve
45 mins5 items
Install New Valve Body
90 mins14 items
6
Test for Leaks
15 mins3 itemsAdvanced
7
Install New Faucet Trim
30 mins6 itemsIntermediate
8
Repair Access Hole and Clean Up
60 mins9 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.