Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Turn on Water and Check for Leaks

Slowly turn both water shutoff valves counter-clockwise to turn the water back on. Use your flashlight to carefully inspect every connection point: where the supply lines meet the shutoff valves, and where they connect to the faucet tailpieces. Also check the base of the faucet on top of the sink for any water seepage. Place a dry paper towel under the connections to make tiny drips more visible. If all is dry, turn the faucet handles on, test both hot and cold water flow, and operate the side sprayer. Perform one final check for leaks while the water is running.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Turn on Water and Check for Leaks

Slowly turn both water shutoff valves counter-clockwise to turn the water back on. Use your flashlight to carefully inspect every connection point: where the supply lines meet the shutoff valves, and where they connect to the faucet tailpieces. Also check the base of the faucet on top of the sink for any water seepage. Place a dry paper towel under the connections to make tiny drips more visible. If all is dry, turn the faucet handles on, test both hot and cold water flow, and operate the side sprayer. Perform one final check for leaks while the water is running.

Videos for this step

Turn on Water and Check for LeaksRestore Water and TestTesting the Installation

Tools and Materials

← Project

How to Replace a Two-Handle Kitchen Faucet

Step 7 of 7·15 min left

Prepare Workspace and Shut Off Water
15 mins3 itemsBeginner
Disconnect Water Supply Lines
20 mins4 itemsAdvanced
Remove the Old Faucet
30 mins3 items
Clean the Sink Surface
15 mins5 itemsBeginner
Mount the New Faucet
25 mins4 itemsIntermediate
Connect Water Supply and Sprayer Lines
20 mins4 itemsIntermediate
7
Turn on Water and Check for Leaks
15 mins4 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.