Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Restore Water and Check for Leaks

Before turning the water on, double-check that both connections are snug. Slowly turn the shutoff valve handle counter-clockwise all the way to open the line. You will hear water flowing into the toilet tank. As the tank fills, carefully inspect both the upper and lower connection points for any signs of water. Look and feel for drips. To be certain, wipe both coupling nuts and the surrounding area with a dry paper towel. Check the paper towel for any moisture. If you detect a leak, turn the water off and tighten the leaking connection slightly (about an eighth of a turn), then test again. Once the tank is full and the fill valve stops, flush the toilet once to ensure everything operates correctly under pressure, and check for leaks one last time.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Restore Water and Check for Leaks

Before turning the water on, double-check that both connections are snug. Slowly turn the shutoff valve handle counter-clockwise all the way to open the line. You will hear water flowing into the toilet tank. As the tank fills, carefully inspect both the upper and lower connection points for any signs of water. Look and feel for drips. To be certain, wipe both coupling nuts and the surrounding area with a dry paper towel. Check the paper towel for any moisture. If you detect a leak, turn the water off and tighten the leaking connection slightly (about an eighth of a turn), then test again. Once the tank is full and the fill valve stops, flush the toilet once to ensure everything operates correctly under pressure, and check for leaks one last time.

Videos for this step

Restore Water, Test, and Replace LidTurn On Water and Test InstallationTurn Water Supply Back On and Test

Tools and Materials

← Project

How to Replace a Toilet Water Supply Line

Step 4 of 4·5 min left

Shut Off Water and Drain the Tank
5 mins2 itemsBeginner
Remove the Old Supply Line
10 mins4 itemsIntermediate
Install the New Supply Line
10 mins2 itemsIntermediate
4
Restore Water and Check for Leaks
5 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.