Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off the Water Supply: Preventing Leaks Before You Begin

Before starting, completely shut off the water supply to your shower. Locate the shut-off valves near the shower or at your main water supply panel. Turn the valves clockwise to stop the water flow. Double-check that the water is off by attempting to run water from the shower or a nearby faucet.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off the Water Supply: Preventing Leaks Before You Begin

Before starting, completely shut off the water supply to your shower. Locate the shut-off valves near the shower or at your main water supply panel. Turn the valves clockwise to stop the water flow. Double-check that the water is off by attempting to run water from the shower or a nearby faucet.

Videos for this step

Turn Off Water SupplyTurn off water supplyPreparation and Access

← Project

How to Replace a Shower Head and Handle: A Step-by-Step DIY Guide

Step 1 of 4·55 min left

1
Shut Off the Water Supply: Preventing Leaks Before You Begin
5 minsBeginner
2
Remove the Old Shower Head: A Step-by-Step Guide
15 mins2 itemsIntermediate
3
Remove and Install the Shower Handle: Simple Steps for Success
30 mins1 itemsAdvanced
4
Check for Leaks: Ensuring a Watertight Seal
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.