Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Prepare and Wrap the New Shower Arm

Take your new shower arm and identify the shorter threaded end that will go into the wall. Take the plumber's tape (Teflon tape) and wrap it tightly around these threads. You must wrap the tape in a clockwise direction (the same direction you will turn the arm to tighten it). This prevents the tape from unravelling during installation. Apply 3 to 5 full wraps of tape, ensuring the threads are covered but the opening of the pipe is not blocked. Smooth the tape down with your finger.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Prepare and Wrap the New Shower Arm

Take your new shower arm and identify the shorter threaded end that will go into the wall. Take the plumber's tape (Teflon tape) and wrap it tightly around these threads. You must wrap the tape in a clockwise direction (the same direction you will turn the arm to tighten it). This prevents the tape from unravelling during installation. Apply 3 to 5 full wraps of tape, ensuring the threads are covered but the opening of the pipe is not blocked. Smooth the tape down with your finger.

Videos for this step

Prepare and Install New Shower ArmApply Teflon Tape to Shower ArmInstall New Shower Arm and Flange

Tools and Materials

← Project

How to Replace a Shower Arm

Step 5 of 7·15 min left

Gather Tools and Materials
5 mins6 itemsBeginner
Remove the Old Shower Head
5 mins1 itemsBeginner
Remove the Old Shower Arm and Flange
10 minsIntermediate
Clean the Wall Fitting Threads
5 mins2 itemsBeginner
5
Prepare and Wrap the New Shower Arm
5 mins2 itemsBeginner
6
Install the New Shower Arm
5 mins4 itemsIntermediate
7
Install New Shower Head and Test for Leaks
5 mins5 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.