Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Remove the Old Sprayer and Hose Assembly

After the hose is fully disconnected from below, move back to the top of the sink. Grasp the old sprayer head and simply pull it upwards. The entire length of the hose will follow, feeding up and out through the mounting base and the hole in the sink deck or countertop. Once the hose is completely removed, use a cloth and an all-purpose cleaner to wipe down the area around the hole, removing any soap scum or mineral deposits.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove the Old Sprayer and Hose Assembly

After the hose is fully disconnected from below, move back to the top of the sink. Grasp the old sprayer head and simply pull it upwards. The entire length of the hose will follow, feeding up and out through the mounting base and the hole in the sink deck or countertop. Once the hose is completely removed, use a cloth and an all-purpose cleaner to wipe down the area around the hole, removing any soap scum or mineral deposits.

Videos for this step

Disconnect Sprayer Head from HoseDisassemble the Sprayer HeadRemove the Old Spray Assembly

Tools and Materials

← Project

How to Replace a Kitchen Sink Sprayer or Hose

Step 3 of 6·30 min left

Prepare Your Workspace and Shut Off Water
5 mins2 itemsBeginner
Disconnect the Old Sprayer Hose
10 mins3 itemsAdvanced
3
Remove the Old Sprayer and Hose Assembly
5 mins2 itemsBeginner
4
Install the New Sprayer Assembly
10 mins1 itemsIntermediate
5
Connect the New Hose to the Faucet
5 mins3 itemsIntermediate
6
Turn on Water and Test for Leaks
10 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.