Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Mount the New Faucet

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Unpack your new faucet and identify all the parts. If your sink has three holes and the faucet only requires one, first place the gasket and then the escutcheon (deck plate) over the holes. Following the manufacturer's directions, carefully feed the faucet's water lines and threaded shank through the center hole. From underneath, slide the rubber gasket, followed by the metal washer and mounting nuts, onto the faucet's shank. Hand-tighten the nuts to secure the faucet. Check the faucet's alignment from above before giving the nuts a final tightening with the basin wrench or supplied tool until snug.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Mount the New Faucet

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Unpack your new faucet and identify all the parts. If your sink has three holes and the faucet only requires one, first place the gasket and then the escutcheon (deck plate) over the holes. Following the manufacturer's directions, carefully feed the faucet's water lines and threaded shank through the center hole. From underneath, slide the rubber gasket, followed by the metal washer and mounting nuts, onto the faucet's shank. Hand-tighten the nuts to secure the faucet. Check the faucet's alignment from above before giving the nuts a final tightening with the basin wrench or supplied tool until snug.

Videos for this step

Assemble the New FaucetMount Faucet to CountertopMount the Faucet

Tools and Materials

← Project

How to Replace a Kitchen Sink Faucet

Step 6 of 10·50 min left

Prepare the Work Area
10 mins2 itemsBeginner
Turn Off Water Supply
5 mins1 itemsIntermediate
Disconnect Water Supply Lines
15 mins3 itemsAdvanced
Remove the Old Faucet
20 mins2 items
Clean the Sink Surface
10 mins3 itemsBeginner
6
Mount the New Faucet
15 mins2 itemsAdvanced
7
Connect New Water Supply Lines
10 mins2 itemsIntermediate
8
Connect Sprayer Hose and Weight
5 mins3 itemsBeginner
9
Turn On Water and Check for Leaks
10 mins1 itemsIntermediate
10
Final Test and Cleanup
10 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.