Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Disconnect Plumbing: Prepare for Removal

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Place a bucket under the disposal to catch any remaining water. Disconnect the dishwasher drain line (if applicable) and the discharge pipe from the disposal unit. Use pliers to carefully loosen any slip nuts or clamps. If using a P-trap, disconnect it gently to avoid water spillage.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Disconnect Plumbing: Prepare for Removal

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Place a bucket under the disposal to catch any remaining water. Disconnect the dishwasher drain line (if applicable) and the discharge pipe from the disposal unit. Use pliers to carefully loosen any slip nuts or clamps. If using a P-trap, disconnect it gently to avoid water spillage.

Videos for this step

Disassemble the P-TrapDisconnect PlumbingDisconnect Pipe and Drain Sink

Tools and Materials

← Project

How to Replace a Garbage Disposal: A Step-by-Step DIY Guide

Step 2 of 4·1.4 hr left

Disconnect Power: Safety First!
15 minsBeginner
2
Disconnect Plumbing: Prepare for Removal
20 mins2 itemsIntermediate
3
Remove the Old Disposal: Make Way for the New
20 mins1 itemsIntermediate
4
Install the New Garbage Disposal: The Final Steps
45 minsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.