Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Clean the Existing Pipe Ends

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

For the new flexible couplings to create a perfect seal, the ends of the remaining cast iron pipe must be clean and smooth. Use a heavy-duty wire brush to scrub the outside surface of both pipe ends, removing all loose rust, scale, and grime. If there are any significant burrs or high spots left from the cutting process, use a metal file to smooth them down. The goal is a clean, uniform surface approximately 2-3 inches from the end of each pipe, where the rubber gasket of the coupling will sit.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Clean the Existing Pipe Ends

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

For the new flexible couplings to create a perfect seal, the ends of the remaining cast iron pipe must be clean and smooth. Use a heavy-duty wire brush to scrub the outside surface of both pipe ends, removing all loose rust, scale, and grime. If there are any significant burrs or high spots left from the cutting process, use a metal file to smooth them down. The goal is a clean, uniform surface approximately 2-3 inches from the end of each pipe, where the rubber gasket of the coupling will sit.

Videos for this step

Clean and Prepare Drain PipePrepare and Position Pipes and CouplingSand and Smooth Pipe Edges

Tools and Materials

← Project

How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC

Step 4 of 7·1 hr left

Prepare the Work Area and Ensure Safety
20 mins4 itemsBeginner
Support the Cast Iron Pipe
30 mins4 itemsAdvanced
Cut and Remove the Damaged Section
45 mins10 items
4
Clean the Existing Pipe Ends
15 mins2 itemsIntermediate
5
Measure and Cut the PVC Replacement Pipe
15 mins3 itemsIntermediate
6
Install the PVC Section with Transition Couplings
15 mins5 itemsAdvanced
7
Tighten Couplings and Test the Repair
15 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.