Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · Final Connections and Testing

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Reconnect the water supply line to the bottom of the toilet tank, hand-tightening first and then giving it a final quarter-turn with a wrench. Turn the water shut-off valve back on slowly and check for leaks at the connection point. Allow the tank to fill completely. Flush the toilet several times. Use a flashlight and paper towels to carefully inspect the base of the toilet all the way around for any signs of water seepage. If it remains dry after several flushes, the installation is successful. You can then use a hacksaw to cut off the excess length of the closet bolts and snap on the decorative caps.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Final Connections and Testing

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Reconnect the water supply line to the bottom of the toilet tank, hand-tightening first and then giving it a final quarter-turn with a wrench. Turn the water shut-off valve back on slowly and check for leaks at the connection point. Allow the tank to fill completely. Flush the toilet several times. Use a flashlight and paper towels to carefully inspect the base of the toilet all the way around for any signs of water seepage. If it remains dry after several flushes, the installation is successful. You can then use a hacksaw to cut off the excess length of the closet bolts and snap on the decorative caps.

Videos for this step

Reconnect Water and Check for LeaksReconnect Water Supply and TestReinstall Tank and Check for Leaks

Tools and Materials

← Project

How to Replace a Cast Iron Toilet Flange with PVC

Step 10 of 10·15 min left

Preparation and Toilet Removal
30 mins5 itemsIntermediate
Expose and Assess Old Flange
15 mins4 itemsBeginner
Break and Remove Old Cast Iron Flange
1 min6 items
Remove the Lead and Oakum Seal
1 min9 items
Clean and Prepare the Cast Iron Pipe
20 mins5 itemsIntermediate
Dry Fit the New PVC Flange
10 mins3 itemsBeginner
Install the New PVC Flange
15 mins2 itemsAdvanced
Secure the Flange to the Subfloor
15 mins3 itemsIntermediate
Reinstall the Toilet
30 mins7 itemsAdvanced
10
Final Connections and Testing
15 mins5 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.