Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Test for Leaks

To ensure your work is successful, perform a thorough leak test. Close the new drain stopper and fill the tub with several inches of water. Let the water sit for at least 15-20 minutes. If you have an access panel or can see the drain from below, use a flashlight to inspect the underside of the drain assembly for any drips. If there is no access, look for any water seeping out around the flange inside the tub. After checking for static leaks, open the drain and let the water flow out. Observe the drain closely as it empties to ensure no water is leaking from under the flange's edge.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Test for Leaks

To ensure your work is successful, perform a thorough leak test. Close the new drain stopper and fill the tub with several inches of water. Let the water sit for at least 15-20 minutes. If you have an access panel or can see the drain from below, use a flashlight to inspect the underside of the drain assembly for any drips. If there is no access, look for any water seeping out around the flange inside the tub. After checking for static leaks, open the drain and let the water flow out. Observe the drain closely as it empties to ensure no water is leaking from under the flange's edge.

Videos for this step

Test for LeaksTest for LeaksReinstall Drain Flange and Test for Leaks

Tools and Materials

← Project

How to Replace a Bathtub Drain Flange

Step 8 of 8·25 min left

Prepare the Work Area
10 mins2 itemsBeginner
Remove the Stopper
5 mins2 itemsBeginner
Remove the Old Drain Flange
30 mins3 items
Clean the Drain Opening
10 mins3 itemsIntermediate
Apply Plumber's Putty
5 mins2 itemsBeginner
Install the New Drain Flange
10 mins4 itemsIntermediate
Final Cleanup and Stopper Installation
5 mins2 itemsBeginner
8
Test for Leaks
25 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.