Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Reconnect the Pivot Rod

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Return to your position under the sink. Take the horizontal pivot rod and slide it back into its opening on the drain tailpiece. You will need to make sure the end of the rod passes through the hole in the new stopper's stem. You might need to wiggle the stopper from above with one hand while feeding the rod with the other to achieve proper alignment. Once the rod is fully inserted and the pivot ball is seated in the tailpiece, screw the retaining nut back on. Hand-tighten it securely. Finally, re-insert the end of the pivot rod into the lift rod strap and secure it with the spring clip, using the same hole as before or a new one for adjustment.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Reconnect the Pivot Rod

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Return to your position under the sink. Take the horizontal pivot rod and slide it back into its opening on the drain tailpiece. You will need to make sure the end of the rod passes through the hole in the new stopper's stem. You might need to wiggle the stopper from above with one hand while feeding the rod with the other to achieve proper alignment. Once the rod is fully inserted and the pivot ball is seated in the tailpiece, screw the retaining nut back on. Hand-tighten it securely. Finally, re-insert the end of the pivot rod into the lift rod strap and secure it with the spring clip, using the same hole as before or a new one for adjustment.

Videos for this step

Reinstall Stopper and Pivot RodRe-install Stopper AssemblyAttach Lift Rod

Tools and Materials

← Project

How to Remove and Replace a Bathroom Sink Pop-Up Stopper

Step 6 of 7·15 min left

Prepare the Work Area
5 mins2 itemsBeginner
Disconnect the Pivot Rod
10 mins3 itemsIntermediate
Remove the Old Stopper
2 mins2 itemsBeginner
Clean Drain and Prepare New Stopper
5 mins3 itemsBeginner
Install the New Stopper
2 mins1 itemsBeginner
6
Reconnect the Pivot Rod
10 mins1 itemsAdvanced
7
Test and Adjust
5 mins2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.