Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off Water Supply and Empty the Toilet

Begin by shutting off the water supply to the toilet. The shutoff valve, also known as an angle stop, is typically located on the wall or floor behind the toilet. Turn the handle clockwise until it is fully closed. Next, flush the toilet and hold the handle down to drain as much water as possible from the tank and bowl. Use a sponge or a wet/dry vacuum to remove any remaining water from both the tank and the bowl to prevent spills during toilet removal.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off Water Supply and Empty the Toilet

Begin by shutting off the water supply to the toilet. The shutoff valve, also known as an angle stop, is typically located on the wall or floor behind the toilet. Turn the handle clockwise until it is fully closed. Next, flush the toilet and hold the handle down to drain as much water as possible from the tank and bowl. Use a sponge or a wet/dry vacuum to remove any remaining water from both the tank and the bowl to prevent spills during toilet removal.

Videos for this step

Drain the TankShut Off Water and Drain TankTurn Off Water and Drain Tank

Tools and Materials

← Project

How to Remove an Old Toilet Flange

Step 1 of 7·2.6 hr left

1
Shut Off Water Supply and Empty the Toilet
15 mins1 itemsBeginner
2
Disconnect and Remove the Toilet
20 mins5 itemsIntermediate
3
Clean and Inspect the Old Flange
15 mins3 itemsIntermediate
4
Remove Flange-to-Floor Fasteners
20 mins3 itemsAdvanced
5
Remove PVC/ABS Flange
25 mins4 items
6
Remove Cast Iron Flange (Alternative)
45 mins6 items
7
Clean Pipe and Floor for New Installation
15 mins2 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.