Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Light the Pilot Light

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Use a long lighter or match to light the pilot. Press and hold the gas control knob while lighting the pilot. Continue holding for 30-60 seconds after ignition to allow the thermocouple to heat. If your model has an igniter button, press and hold it instead.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Light the Pilot Light

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Use a long lighter or match to light the pilot. Press and hold the gas control knob while lighting the pilot. Continue holding for 30-60 seconds after ignition to allow the thermocouple to heat. If your model has an igniter button, press and hold it instead.

Videos for this step

Hold Knob DownLight the PilotLight the pilot

Tools and Materials

← Project

How to Relight a Gas Water Heater Pilot Light

Step 3 of 5·7 min left

Access the Water Heater's Interior
2 minsBeginner
Turn the Gas Control to 'Pilot'
1 minBeginner
3
Light the Pilot Light
5 mins1 itemsIntermediate
4
Turn the Gas Control to 'On'
1 minBeginner
5
Reinstall the Access Panel
1 minBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.