Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Light the Gas Water Heater Pilot

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Using a long lighter or match, carefully light the pilot light while holding down the control knob (or pressing the igniter button). Hold the knob down for 30-60 seconds after ignition to allow the thermocouple to heat up. If the pilot doesn't light, repeat the process and check for obstructions.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Light the Gas Water Heater Pilot

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Using a long lighter or match, carefully light the pilot light while holding down the control knob (or pressing the igniter button). Hold the knob down for 30-60 seconds after ignition to allow the thermocouple to heat up. If the pilot doesn't light, repeat the process and check for obstructions.

Videos for this step

Light Pilot LightLight the PilotIgnite Pilot

Tools and Materials

← Project

How to Relight a Gas Water Heater Pilot Light: A Step-by-Step Guide

Step 3 of 5·8 min left

Access Your Gas Water Heater's Pilot Light
5 mins1 itemsBeginner
Set the Water Heater Control Knob to 'Pilot'
2 minsBeginner
3
Light the Gas Water Heater Pilot
5 mins1 itemsIntermediate
4
Turn the Gas Water Heater On
1 minBeginner
5
Secure Your Gas Water Heater
2 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.