Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Tear and Secure the Tape

Once you have completed 3 to 5 wraps, pull the tape sharply to tear it from the roll. There is no need for scissors. After tearing, take your finger and firmly press the loose end of the tape against the wrapped layers. Smooth down the entire wrapped area to ensure the tape is well-adhered and conforms to the shape of the threads. The individual thread profiles should still be somewhat visible through the tape.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Tear and Secure the Tape

Once you have completed 3 to 5 wraps, pull the tape sharply to tear it from the roll. There is no need for scissors. After tearing, take your finger and firmly press the loose end of the tape against the wrapped layers. Smooth down the entire wrapped area to ensure the tape is well-adhered and conforms to the shape of the threads. The individual thread profiles should still be somewhat visible through the tape.

Videos for this step

Apply Tape to Pipe ThreadsApply Second Layer of TapeStart Wrapping Tape Clockwise

Tools and Materials

← Project

How to Properly Apply Thread Seal Tape (Teflon Tape)

Step 4 of 5·31 min left

Prepare and Clean the Threads
2 mins3 itemsBeginner
Begin Wrapping in the Clockwise Direction
1 min2 itemsBeginner
Wrap with Overlapping Layers
1 min1 itemsBeginner
4
Tear and Secure the Tape
30 mins2 itemsBeginner
5
Assemble and Tighten the Fitting
1 min4 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.