Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Secure Toilet and Check for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Place the plastic friction washers and metal washers, followed by the nuts, onto the closet bolts. Hand-tighten the nuts first. Then, use an adjustable wrench or deep socket to slowly tighten them, alternating from the left side to the right side a half-turn at a time. This ensures even pressure and prevents cracking the toilet base. Tighten until the toilet is stable and does not rock, but do not overtighten. The porcelain can easily crack. If the bolts are too long, use a mini-hacksaw to cut them down to just above the nut. Place the decorative plastic caps over the nuts. Finally, reconnect the water supply line to the toilet tank fill valve. Turn the water shutoff valve on slowly, allowing the tank to fill. Flush the toilet 3-4 times and meticulously check around the base of the toilet for any signs of water leaks.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Secure Toilet and Check for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Place the plastic friction washers and metal washers, followed by the nuts, onto the closet bolts. Hand-tighten the nuts first. Then, use an adjustable wrench or deep socket to slowly tighten them, alternating from the left side to the right side a half-turn at a time. This ensures even pressure and prevents cracking the toilet base. Tighten until the toilet is stable and does not rock, but do not overtighten. The porcelain can easily crack. If the bolts are too long, use a mini-hacksaw to cut them down to just above the nut. Place the decorative plastic caps over the nuts. Finally, reconnect the water supply line to the toilet tank fill valve. Turn the water shutoff valve on slowly, allowing the tank to fill. Flush the toilet 3-4 times and meticulously check around the base of the toilet for any signs of water leaks.

Videos for this step

Secure Toilet and Clean Excess PlasterTighten the Closet BoltsTighten Closet Bolts

Tools and Materials

← Project

How to Install a Toilet Flange Extender

Step 6 of 6·15 min left

Prepare the Work Area and Clean the Flange
15 mins3 itemsIntermediate
Dry Fit the Flange Extender
5 mins2 itemsBeginner
Apply Silicone Sealant
5 mins2 itemsIntermediate
Secure the Extender and Closet Bolts
15 mins6 itemsIntermediate
Install the Wax Ring and Set the Toilet
10 mins5 itemsAdvanced
6
Secure Toilet and Check for Leaks
15 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.